SAPIRHOME SP-1162-C, CST Instruction Manual

Blender
SP-1162-C, CST
INSTRUCTION MANUAL

PARTS IDENTIFICATION

1. Cover grip
2. Top cover
3. Jar
4. Motor base
5. Switch
6. Cover
7. Container

FEATURES:

Artistic and durable: Only quality plastics are used.
Multi-purpose: Blending and grinding two in one appliance.
Safe: With an elaborate safety device employed.
Convenient: Dual-speed adjustment and short-time operation.

SAFETY PRECAUTIONS:

1. Be sure that the local power supply voltage is in conformity with the rated voltage of the unit.
2. Wash and rinse all removable parts except motor base.
3. The unit should be placed on hard horizontal surface for use and kept away from stove and
other heat sources.
4. Be sure that the blender or dry mill has been locked onto the motor base.
5. Be sure that the power outlet matches the plug of the unit. Do not use joint electric wire.
6. This appliance is for household use only.

HOW TO USE THE BLENDER

1. Wash the foods (fruits, vegetables, etc.) that will be blended (peel skin or remove pits when
necessary). Cut them into pieces to fit for blending.
2. Put the sliced foods into the transparent plastic jar and put on the top cover. Each time of
blending, do not put more than half of the cup scale (approx 0.5 liter) of food in it. A too small
quantity is not preferable either. Proper quantity of water should be added during blending.
3. Plug the power cord to a power source and adjust the switch to speed 1 (low speed) or speed 2
(high speed) position, the blender begins working. It only takes a few minutes to blend the
food into small pieces. Then adjust the switch to "0" position to turn off the whole unit, detach
the blender and pour out blended food.
4. The blender will also operate when the switch is held on 'Pulse' position. When the switch is
loosened, it will return to "0" position and shut down automatically. This function is designed
for short-time blending (a few seconds), which makes it easy to control the blending time.
_English_