Guarantee; Service Of Devices; Photosensor; Pic. 14. Photosensor Position (1) In M350 / M500 Burner - Pellas X M-line M350 User Manual

Failure in observing by the user – owner of a burner the above SAFETY REGULATIONS
releases Manufacturer – PELLASX sp. z o.o. sp. k. from any responsibility for improper work of a
burner and results in loss of the warranty.
If the user executes the installation of a burner not in accordance with instructions and
recommendations of the producer or when he does not have the „Collection Report" written during
first firing-up of a boiler by authorized installer and confirmed with the signature of the user, then
he or she loses the right to warranty for burner faults. Also the guarantee is lost then.

6.6. Guarantee

Details in the GUARANTEE CARD attached to the User's Manual.

SERVICE OF DEVICES

7.
ATTENTION!
Servicing of devices can only be conducted
after switching off electrical
power of a burner and a boiler.

7.1. Photosensor

Photosensor in a burner should be cleaned regularly with a damp, soft rug, similarly to oil or gas
burners. After removing the cover of a burner, the photosensor should be removed from the socket
(1), then it should be cleaned and installed again. After executing the above activities, the cover of
a burner should be mounted.
Frequency of cleaning the photosensor:
• Bakeries- once a month
Boiler rooms – every 3 months
1

Pic. 14. Photosensor position (1) in M350 / M500 burner.

23