Programmed Disc Play - NexxTech 1219769 Owner's Manual

REPEAT/RANDOM MODE
Press the MODE button before or during play. A single track, all tracks or random tracks will be played.
Each press changes the mode as follows:
1 REPEAT
(Repeat indicator will flash)

PROGRAMMED DISC PLAY

Up to 20 tracks can be programmed to play in a specific order by following these steps:
1. Slide the BUZZER/CD/RADIO/LINE IN switch to the CD/RADIO/LINE IN position.
2. Set the (CD/AM/FM/LINE IN) switch to CD.
3. Press the ON/OFF button to ON status,the ON/OFF indicator will light up.
4. Press the PROGRAM button.
5. Press the MINUTE / I<< or >>I / HOUR to select the track number.
6. Press the PROGRAM button when the desired track number is displayed.
7. Repeat steps 5 and 6 to program more tracks.
8. Press the PLAY/PAUSE (
To check the programmed play:
Press the PROGRAM button during stop mode. The programmed track number will be displayed in the
programmed order each time you press the PROGRAM button.
To erase the programmed play, use one of the following methods:
- Press the PROGRAM button and then the STOP (
- Press the STOP (
- Open the disc compartment to erase the contents of programmed memory.
TO SET THE ALARM TO WAKE-UP TO BUZZER/CD/RADIO
The radio, buzzer or CD automatically sounds at the designated time every day.
You can set a total of two wake-up times (ALARM 1 and ALARM 2) with this unit.
Wake by CD/AM/FM/BUZZER (set during OFF mode, when the ON/OFF indicator is off).
1. Press the ALARM 1 or ALARM 2 button, the display will flash.
2. Use the MINUTE / I<< or >>I / HOUR button to set the desired wake-up time.
3. Press the ALARM 1 or ALARM 2 button after setting. The ALARM 1 or ALARM 2 active indicator will
light up on the display respectively.
4. Slide the BUZZER/CD/RADIO/LINE IN selector to the BUZZER position for BUZZER wake up. For CD/
AM/FM wake-up, first slide the BUZZER/CD/RADIO/LINE IN selector to CD/RADIO/LINE IN position,
then slide the function selector to CD, AM or FM positions and adjust the volume.
5. To cancel ALARM 1 wake-up, press the ALARM 1 button once, the active indicator will turn off
(repeat the same procedure to cancel ALARM 2).
2 REPEAT ALL
(Repeat indicator will be steady on) (Random indicator will be steady on) (Repeat indicator, Random indicator
) button to start programmed playback.
) button while the CD is playing the programmed track.
3 RANDOM
) button when the CD is stopped.
6
4 REPEAT/RANDOM OFF
will turn off)