Important Safety Instructions - NexxTech 1219769 Owner's Manual

WARNINGS
TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT
APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
CLASS 1 LASER PRODUCT
THIS PRODUCT CONTAINS
A LOW-POWER LASER EMITTER.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.
2. Keep these Instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Ventilation - DO NOT block any ventilation
openings. Install in accordance with manufacturer's
instructions.
8. Keep Away From Heated Areas - DO NOT place
the unit near heat; for example, near a radiator,
stove, or other heating device.
9. Grounding or Polarization - This product may be
equipped with a polarized alternating current line
plug (a plug having one blade wider then the other).
This plug will fit the power outlet only one way. This
is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician to
replace your obsolete outlet. DO NOT defeat the
safety purpose of the polarized plug.
10. Power Cord Protection - Power supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them. Pay particular attention to cords
at plugs, convenience receptacles, and the point
where they exit from the product.
11. Use only attachments/accessories specified by the
manufacturer.
12. Lightning - For added protection on this product
during a lightning storm, or when it is left unattended
EXPOSE THIS
EXPLANATION OF GRAPHIC SYMBOLS
The lightning flash with an arrowhead within
a triangle alerts you to uninsulated dangerous
voltage within the product's enclosure that
could cause an electric shock.
The exclamation point within a triangle alerts
you to the presence of important operating,
maintenance
this user's manual.
INVISIBLE LASER RADIATION WHEN UNIT IS
OPENED AND INTERLOCKS ARE DEFEATED.
AVOID EXPOSURE TO LASER BEAM.
and unused for a long period of time, unplug it from the
outlet and disconnect the antenna or cable system. This
will prevent damage to the product due to lightning and
powerline surges.
13. Damages Requiring Service - Unplug this product from
the wall outlet and refer servicing to qualified service
personnel under the following conditions :
(a). When the power-supply cord or plug is damaged.
(b). If liquid has been spilled, or objects have fallen onto
the product.
(c). If the product has been exposed to rain or water.
(d). If the product does not operate normally after
following the operating instructions. Adjust only those
controls that are covered by the operating instructions
as an improper adjustment of other controls may
result in damage and will often require extensive work
by a qualified technician to restore the product to its
normal operation.
(e). If the product has been dropped or damaged in any
way.
(f). When the product exhibits a distinct change
performance - this indicates a need for
service.
14. Use only with the cart, stand,
tripod, bracket, or table specified by
the manufacturer, or sold with the
product. When a cart is used, use
caution when moving the cart and
product to avoid injury from tip-over.
15. This appliance should not be exposed to dripping or
splashing water and no object filled with liquids, such
as vase, should be placed on the apparatus.
1
and servicing instructions in
CAUTION