Connections; Connect To Av Out; Connect To The Hdmi; Connect Network - THOMSON DVDPB-10 User Manual

Connections

1. Connect to AV OUT

1. Turn off the power and unplug both units before setting up any connections.
2. Connect the AV cable to AV OUT.
3. Connect the yellow cable (Video) to the VIDEO-IN of the TV set.
4. Connect the red and white cable to the AUDIO-IN of the TV set.
5. Change the resolution to 480P/576P or 480I/576I by setup menu .
Please set the resolution to 720P for the best image effect of the screen after you finished
using the the AV jack.

2. Connect to the HDMI

Connect the HDMI cable (not supplied) to the HDMI jack on this product and to the HDMI
input jack on the TV.
Please change the resolution to 1080P for the best image effect.
Please set the resolution to 720P for the best image effect of the screen after you finished
using the HDMI jack.
Tip
• You can optimize the video output by pressing the Resolution button repeatedly to select
the best resolution the TV can support.
• To play the digital video images of a BD-video or DVD video via an HDMI connection, it is
necessary that both this product and the display device (or an AV receiver/ amplifier)
support a copyright protection system called HDCP (high-bandwidth digital content
protection system)
• This type of connection provides best picture quality.

3. Connect Network

Connect this product to the network to enjoy software updates and BD-Live bonus content.
EN-6