Pantech AT&T P2030 User Manual page 94

– Do not use a damaged battery
or charger.
– Do not disassemble or open
crush, bend or deform,
puncture or shred.
– Do not modify or
remanufacture, attempt to
insert foreign objects into the
battery, immerse or expose to
water or other liquids, expose
to fire, explosion or other
hazard.
– Do not put your battery into
contact with conductive
objects.
182
– Dispose of and recycle used
batteries in accordance
with local regulations. Do
not dispose of batteries by
burning; they may explode.
– Do not use an unauthorized
charger. Only use the battery
for the device for which it is
specified.
– Only use the battery with
a charging device that has
been qualified with the device
per this standard. Use of an
unqualified battery or charger
may present a risk of fire,
explosion, leakage, or other
hazard.
– Do not short circuit a battery
or allow metallic conductive
objects to contact battery
terminals.
– Replace the battery only
with another battery that
has been qualified with the
device per this standard,
IEEE-Std-1725-2006. Use of
an unqualified battery may
present a risk of fire, explosion,
leakage or other hazard.
– Promptly dispose of used
batteries in accordance with
local regulations.
– Battery usage by children
should be supervised.
Appendix
– Avoid dropping the phone or
battery. If the phone or battery
is dropped, especially on a hard
surface, and the user suspects
damage, take it to a service
center for inspection.
– Use your battery for the
specified purpose only.
– The closer you are to your
network's base station, the
longer your phone usage time
because less battery power is
consumed for the connection.
– The battery recharging time
varies depending on the
remaining battery capacity and
the battery and charger type
01
02
03
04
05
06
01
02
03
04
05
06
07
183