Panasonic BB-HCM371A Operating Instructions Manual page 52

Operating Instructions
IPsec Mode Selection
Select transport mode or tunnel mode to access the camera.
Transport Mode (IPv4 Only)
The image is encrypted in the whole way between the camera and your PC. In the
environment of Windows XP Service Pack 1 or later, transport mode is available
only in IPv4.
Prepare the following requirements.
Item
PC
Camera
52
Transport Mode
Encrypted
Operating System
Web Browser
ISP Service
Note
To use IPsec, you need to set up your operating system.
See the Panasonic Network Camera support website at
http://panasonic.co.jp/pcc/products/en/netwkcam/ for
the setup.
ISP Service
Supported Feature
: Windows XP Service Pack 1 or later
: Internet Explorer 6.0 or later
: Services for multiple global addresses (A
global address must be set up on your
PC.)
: Services for multiple global addresses (A
global address must be set up to the
camera.)