Panasonic BB-HCM371A Operating Instructions Manual page 43

DHCP Setup
• Clicking [Cancel] takes you back to the previous page without
saving changes.
4.
Click [Save] when finished.
• New settings are saved.
• When finished, the following page is displayed.
Note
The current network settings are shown on the Status page in the Maintenance
section (see page 118).
5.
Click [Restart].
• The camera restarts, and the Top page is displayed.
• If the camera is restarted, all buffered images on the internal memory are
deleted. The buffered images on the SD memory card are not deleted.
• Checking [Yes] for [Allow Access from the Internet] on [Automatic Setup]
may not display the Top page, because the port number may change. Use
the Setup Program to access the camera.
[For assistance, please call: 1-800-272-7033]
Static Setup
Operating Instructions
43