Operating Instructions
11.
Click [Go to Image Buffer/Transfer page].
•
The Image Buffer/Transfer page is displayed.
Notes
•
If you set a short interval to transfer image to a cell phone, many E-mails
may be sent to it leading to a large phone bill. Therefore, we recommend
you to set a long interval. 1 image per second frequency is recommended.
•
Alarm transfer stops its operations until the camera finishes all transfers.
For example, if the camera transfers 3 images per minute and 6 images in
total, the alarm detection will be in the following operation.
•
If you are buffering images on the internal memory, the following
operations also delete all buffered images.
•
•
•
110
1st
2nd 3rd
Detectable
An alarm signal is detected.
Turning off the camera.
Saving the Date and Time page.
Restarting, updating firmware or resetting the camera to factory
default.
120 seconds
4th
5th
6th
Undetectable
Detectable