American Leather SHA BED Installation

This cylinder leg is
only used for the
King Size Bed
FIG. #1: Legs, bolts, washers and screws
provided.
1
FIG. #4: Make sure to install the bolts
on each opposite side at this location
first before installing the remaining bolts.
SHA BED Installation
Quantity in Box: Prism Legs (4) Bolts (8) Washers (8) Screws (8)
Cylinder Leg (1) King Size Bed Only
BED FRAME
FIG. #2: Turn the bed over on its side as
shown.
FIG. #5: Make sure to install the bolts
and washers to the location as
indicated by the arrows.
HEAD
BOARD
FIG. #3: Open zipper on the bottom of
the bed to fasten bed platform to head
board.
FIG. #6: Install each leg at the corner
(king will have 5th middle leg) with 2
wood screws before turning the bed
over.
This cylinder center
leg is only used for the
King Size Bed
#100113