Table of Contents
Advertisement
2.
Loosen the fasteners, lift up the air filter
case cover slightly, and then unhook the
cover from the air filter case to remove it.
2
1
1. Air filter case cover
2. Fastener
To install the front cover and air filter case
cover
1.
Insert the projections on the end of the
air filter case cover into the slots in the air
filter case, place it in the original position,
and then tighten the fasteners.
1. Projection on the end of the air filter case
cover
2. Slot in the air filter case
2.
Fit the holders on the front cover over the
projections on the air filter case cover,
slide the front cover downward, and then
hook the latch onto the holder on the
front of the snowmobile.
Periodic maintenance and adjustment
1. Holder on the front cover
2. Projection on the air filter case cover
Shroud and air filter case cover
(PZ5NT)
To open the shroud and remove the air filter
case cover
1.
Unhook the shroud latches, and then
slowly raise the shroud forward until it
stops.
1. Shroud latch
2. Shroud
2.
Loosen the fasteners, lift up the air filter
case cover slightly, and then unhook the
cover from the air filter case to remove it.
45
Advertisement
Table of Contents
