Casio Exilim EX-Z1050 User Manual page 91

■
Creating Your Own BEST SHOT Scenes
You can use the procedure below to save the setups of
snapshots that you shot as BEST SHOT scenes. After that, you
can recall a setup whenever you want to use it.
1.
In the REC mode, press [BS].
2.
Use [ ], [ ], [ ], and [ ] to select "BEST
SHOT" (Register User Scene) and then press
[SET].
3.
Use [ ] and [ ] to select the snapshot whose
setup you want to register.
4.
Use [ ] and [ ] to select "Save" and then
press [SET].
Your BEST SHOT scene will be assigned the name "Recall
User Scene", along with a scene number.
IMPORTANT!
• Formatting the camera's built-in memory (page 189)
deletes all the user BEST SHOT scene files.
NOTE
• You can check the settings of the currently selected BEST
SHOT scene by displaying the camera's setting menus and
looking at its settings.
• User scenes are assigned numbers in the sequence: U1,
U2, and so on.
• The following are the settings that are included in a user
scenes:
Focus, EV Shift, White Balance, Flash, ISO, Metering,
Flash Intensity, Flash Assist, Filter, Sharpness, Saturation,
Contrast
• You can store up to 999 BEST SHOT user scenes.
• User snapshot scenes are stored in camera built-in
memory in the folder named "SCENE" (page 224).
91
USING BEST SHOT