Casio Exilim EX-Z1050 User Manual page 205

Making sure that the
aligned with the
connect the cable to the camera.
USB Port
• When connecting the bundled USB cable to the camera's
USB/AV port, insert the plug into the port until you feel it
click securely into place. Failure to insert the plug fully
can result in poor communication or malfunction of the
connected components.
• Some metal of the plug is visible
even when the plug is inserted
correctly.
B
mark on the camera is
mark of the USB cable plug,
USB Cable
USB/AV
connector
• Take care when connecting the USB cable to the camera
or your computer. USB ports and cable plugs are shaped
for proper positioning.
6.
Turn on the camera.
Camera-Computer Connection
Pressing the camera's [ON/OFF] button puts it into the USB
mode, which is indicated by the camera's operation lamp lighting
green. In this mode, your computer recognizes the memory card
loaded in the camera (or the camera's built-in memory if it does
not have a memory card loaded) as a removable disk.
From now on, you will not have to perform steps 3 through 5 in
the above procedure when you connect the camera to your
computer (unless you change the camera's USB settings for
some reason).
• With some Windows setups, you may see a guidance
message appear on your display to let you know about the
new removable disk. If this happens, simply close the
guidance message dialog box.
USING THE CAMERA WITH A COMPUTER
205