Changing The Camera Date And Time Setting - Casio Exilim EX-Z1050 User Manual

To have the camera do this:
Remember the numbers used for files. Files
will be named using the next sequential
number, even if files are deleted or if a blank
memory card is loaded.
• If a memory card is loaded that already
has files stored on it and the largest
sequential number in the existing file
names is greater than the largest
sequential number remembered by the
camera, numbering of new files will start
from the largest sequential number in the
existing file names plus 1.
Restart the serial number from 0001
whenever all files are deleted or when the
memory card is replaced with a blank one.
• If a memory card is loaded that already
has files stored on it, numbering of new
files will start from the largest sequential
number in the existing file names number
plus 1.
B
Select this Changing the Camera Date and Time
setting:
Setting
When changing the date and time setting, be sure to do so for
your Home City (the location where you normally use the
camera). If you already have your Home City setting configured
correctly, you can use the procedure under "Setting the Date
and Time for Your Home City" (page 182) to change the current
Continue
time setting only, if you want.
IMPORTANT!
• Changing the time and date setting without correctly
configuring your Home City setting first will cause all of the
World Time (page 184) dates and times to be off.
■
Selecting Your Home City
1.
Press [MENU].
Reset
2.
On the "Set Up" tab, select "World Time" and
then press [ ].
This displays the current World Time settings.
181
OTHER SETTINGS