Advertisement
TYPHOON GUARD GAMING CHAIR
Gas-Li� Tilt
- To adjust chair height, pull
lever upward while lifting body
weight slightly off the seat.
- Release lever at desired height.
- To lower chair height sit fully into
the chair and pull lever upward.
- Release lever at desired height.
Y our feet should be resting flat on
the floor.
Chair Tilt
- Sitting in the chair pull lever up.
Move your body to a comfortable
position. Lock the position by
pushing the lever down.
Headrest Height
- Adjust the headrest height up and
down by holding back and lifting the
headrest up to raise and push down
HEADREST
to lower.
HEIGHT
Headrest Angle
- Hold the headrest and rotatd forward
or back to desired angle.
HEADREST
ANGLE
Lumber support Height
- Slide the lumber support up or down
to the desired location.
LUMBER
SUPPORT
HEIGHT
Arm height
Pull lever up whilst moving the
arm up or down. Release lever
at desired height.
Functionality
9/10
Advertisement
