Electrolux EN3489MFX User Manual page 22

22 www.electrolux.com
Once the maximum or
minimum temperature is set,
pressing the key again will
not change temperature
setting. The audible sound is
heard.
4.4 Active mode
Active mode allows to change any
setting in the appliance.
To switch on active mode, open the door
or hold any button for 1 second until the
audible signal is heard.
The icons illuminate.
The active mode switches
off automatically after 30
seconds.
4.5 Temperature boost
functions ShoppingMode and
FastFreeze
The temperature boost functions rapidly
decrease the temperature in desired
compartment for proper food storage
reason. We suggest activating the
ShoppingMode to chill the products more
rapidly to avoid warming the other food
which is already in the refrigerator and
FastFreeze function to provide rapid
decreasing the temperature in the
freezer, allowing fresh food to freeze
quickly.
This functions stop
automatically as follows:
• ShoppingMode after 6
• FastFreeze after 52
1. To switch on the ShoppingMode
press mode key once.
The ShoppingMode indicator appears.
2. To switch on the ShoppingMode and
FastFreeze together press mode key
twice.
The ShoppingMode and FastFreeze
indicators appear.
3. To switch on the FastFreeze press
mode key three times.
The FastFreeze indicator appears.
hours,
hours.
4. To deactivate the functions press
mode key until the FastFreeze and/or
ShoppingMode indicators switch off.
4.6 ECO mode
The ECO mode is activated if the set
temperature for desired compartment is
as follows :
• 4°C for fridge compartment;
• -18°C for freezer compartment
The ECO mode indicator is shown when
the function is activated.
This settings guarantee
minimum energy
consumption and proper
food preservation
characteristics.
4.7 ExtraHumidity mode
If you need to increase the humidity in
the refrigerator, we suggest activating
the ExtraHumidity function.
1. To switch on the function press
ExtraHumidity key.
The ExtraHumidity indicator illuminates.
2. To deactivate the function press
ExtraHumidity key until the
ExtraHumidity indicator switches off.
4.8 DEMO mode
DEMO mode allows to operate the panel
without activating the appliance.
• To activate the mode, press mode key
9 times, until dE appears on the
display.
• To deactivate the mode, press mode
key for approximately 10 seconds.
The appliance returns to regular
mode.
4.9 High temperature alarm
An increase in the temperature in the
freezer compartment (for example due to
an earlier power failure or door is open)
is indicated by:
• flashing the compartment select key
and compartment indicator;
• acoustic buzzer.
To reset the alarm press any key.