Contents Warning ............3 Before use ..........7 Reduction in energy consumption ....7 Get to know your wine cabinet ....8 Electrical connection ........9 Installation and start-up ......9 Installation ..........10 Shelves and loading .........12 Shelf adjustment........13 Operation and function ......15 Defrosting, cleaning and maintenance ..20 Fault finding ..........21 Disposal ............22 User Manual...
Warning WARNING: As the appliance contains a flammable refrigerant, it is es- Do not damage the refrigerant sential to ensure that the refrig- system. erant pipes are not damaged. WARNING: The quantity and type of the Do not use electrical applianc- refrigerant used in your appli- es inside the refrigerated stor- ance is indicated on the rating...
Page 5
maintenance unless they are at refrigerant. Avoid safety hazards least 8 years old and are being by carefully installing, handling, supervised. servicing and disposing of this appliance. WARNING: It is hazardous for anyone oth- ● Children must not play with, on, er than an Authorised Service or around the appliance.
Page 6
facturer, its service agent or This appliance is intended to ● similarly qualified persons in be used exclusively for the order to avoid a hazard (For storage of wine. Australia and New Zealand). It is normal for some conden- ● Always keep the keys in a sation to appear on the inside ●...
You may not be able to claim laid down, or if it has been stored in cold on the Vintec manufacturer’s warranty in the surroundings (colder than + 5°C), it must be event that your product fault is due to failure allowed to stabilise in an upright position for to adhere to this manual.
Get to know your wine cabinet VWCM280CAB-L ,VWCM280CAB-R Control panel Lock Fans Lighting Door Sealing strip Positions 1-6 Fixed shelves Wheel Adjustable feet Name plate fig.2 User Manual...
Installation and start-up Electrical connection Placement Wiring and connections in power supply systems must meet all applicable (local and For safety and operational reasons, the ap- national) electrical codes. Consult these pliance must not be installed outdoors. codes prior to cabinet installation. The appliance should be placed on a level Connect the appliance only to 220/240 V surface in a dry, well ventilated room (max.
Installation The surface on which the appliance is to be placed must be level. Do not use a frame or similar. The appliance can be installed as a free- standing unit against a wall, built into a closet or lined up with other appliances. It is important that the appliance be well ventilated and that air can circulate un- hindered above, below and around it.
Page 11
Anti-tip It is recommended to install the supplied anti-tip device to avoid the unit from tipping over. The appliance must be securely attached to the wall by the anti-tip bracket device. The hardware used to secure your appliance to the wall depends on your wall material and will need to be sourced separately to suit the specific installation.
Shelves and loading Fixed shelf - VWCM280CAB-L; VWCM280CAB-R Max. 60 kg. fig. 8 To optimise the storage capacity of your wine cabinet it has been designed so that only Bordeaux style bottles can be stored on the outer position of the shelf.
Shelf adjustment To remove the fix shelves: 1. Open door to fully 135°. 2. Remove all wine bottles from the shelf. 3. Remove the back locker pin on both side. It is accessible by finger. Pull forward and push fig. 10 4.
Page 14
2. put back the shelf to the holders and check the shelf level and plane with care. If you en- sured the shelf is in good position than replace back the two shelf backside fixation clips and push it down (you will hear when it snaped in) fig.
Operation and function Mode Set temp. Upper temp. Alerts Bottom temp. Set temp. Light Upper zone Bottom zone. fig. 16 Electronic control Temperature indication The electronic control ensures that the The display shows the actual temperature. temperatures set at the top and at the bot- The left digits of the display indicate the tom of the appliance are maintained.
Page 16
Single press to turn the lights ON/OFF. Single pr ess to turn the lights ON/ OFF Bottom temp. display shows the, light level Vintec - Ve stfros t UI P If Off, the light is always off (door opened or 1L: Lowest level / least bright closed).
Page 17
Pr oposal High/Low Temperature alert. This alert will Reset Filter alert Vintec - Ve stfros t UI Pr op display in case of a high or low temperature 2018.10.0 2 inside the appliance. The alert icon will turn on, but will not blink and will remain on till Sabbath mode is deactivated.
Page 18
Multi zone feedback will be Off, and Bottom & Upper temperature display shows “CE” & Mute sounds Vintec - Ve stfros t UI Pr oposal “CE” blinking. After 5 seconds without any Press & Hold combined on decrease bottom interaction with the Mode button, the ”CE”...
Page 19
oposal Low Temper ature alert sho ws “ Lº ” and blinks the alert icon. 2018.10.0 2 & 3.1 High / Low t emper atur e alert 3.2 Door open alert Door open alert but- High Temper atur e alert sho ws “Hº” and blinks When the door s ta ys open for some amount o f the alert icon.
Defrosting, cleaning and maintenance Automatic defrosting Spare parts The wine cabinet is defrosted automatically. When ordering spare parts, please state Defrost water runs through a pipe and is the type, serial and product numbers of collected in a tray above the compressor your appliance.
Fault finding Fault Possible cause Remedy The appliance is not Power failure; the fuse is blown; Check that power is connected. working. the appliance is not plugged in Reset the fuse. correctly. Water collects in The defrost water pipe is Clean the defrost water channel the bottom of the blocked.
Disposal Information for Users on Collection For business users in the European Union. and Disposal of Old Equipment and If you wish to discard electrical and used Batteries electronic equipment, please contact These symbols on the products, your dealer or supplier for further packaging, and/or accompanying information.
Need help?
Do you have a question about the VWCM280CAB-L and is the answer not in the manual?
Questions and answers