Huawei P smart S User Manual page 32

Table of Contents

Advertisement

1
Open Camera or go to Camera > More(depending on your device model), and select
Night mode.
2
When shooting with the rear camera, some devices allow you to adjust the ISO sensitivity
and shutter speed by touching
3
Steady your device and touch the shutter button.
4
Your device will adjust the exposure time based on the ambient brightness. Keep your
device steady until the countdown finishes.
You can also touch the shutter button to take a photo before the countdown finishes.
Some devices do not support ending a countdown before it is due to finish.
Take Dazzling Night Selfies
To take a selfie at night, or in a low-light environment, simply use the front camera in Night
mode.
In dim environments, you can turn on the flash to illuminate your face.
1
Open Camera or go to Camera > More (depending on your device model), and select
Night mode.
2
Touch
to switch to the front camera. From there, feel free to:
Touch the flash icon and select
allows you to capture a well-lit photo of your face when you are in a poor lighting
environment.
Touch
to adjust the beauty effects.
If you can't find the
mode is not available.
3
Steady your device and touch the shutter button.
Take Photos, with Aperture Mode
Take Wide Aperture Photos
Wide aperture mode allows you to shoot photos and videos with a blurred background while
your subject remains in sharp focus.
1
Open Camera or go to Camera > More(depending on your device model) and select
Aperture mode.
2
Touch where you want to focus. For best results, your device needs to be within 2 m
(about 7 ft.) of your subject.
3
Touch
in the viewfinder and drag the slider to adjust aperture settings. A smaller
aperture value will create a more blurred background.
4
Touch the shutter button to shoot a photo.
or
in the viewfinder.
(auto) or
icon in the viewfinder of your device, it means that Beauty
(steady on) to enable the flash. This
Camera and Gallery
30

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aqm-lx1P smart+ 2019

Table of Contents