Table of Contents
Advertisement
Advanced Settings
Last updated: May 10, 2022 11:17. Revision #4024
Note: Prior to performing any of the following procedures, please ensure that the DacMagic 200M is in standby, which is indicated by only the standby
LED being lit.
To perform a factory reset
1.
Briefly press both the Source and Filter buttons simultaneously.
2.
All LEDs will light in sequence, one by one.
Upon performing a factory reset all user-stored settings (input, volume and output mode) will be erased, and replaced by the unit's default settings after
a factory reset.
Toggle between fixed, and variable output modes
The DacMagic 200M can be switched between a fixed output mode which disables the front panel volume control, and variable mode which enables the
front panel volume control, allowing volume adjustment on the unit.
20
Advertisement
Table of Contents
