Rear Panel Connections - Cambridge Audio DacMagic 200M Manual

Hide thumbs Also See for DacMagic 200M:

Table of Contents

Rear Panel Connections

Last updated: May 10, 2022 10:22. Revision #4020

– Outputs for use with unbalanced RCA cables.

1. Unbalanced Audio Outputs

2. Balanced Audio Outputs – Outputs for use with balanced XLR cables. Suitable for when a longer connection is needed between the DacMagic 200M,

and an ampliﬁer.

3. Digital Inputs 1 and 2 – The DacMagic 200M oﬀers two digital inputs allowing a wide range of sources to be connected via the use of S/P DIF co-

axial, or TOSLINK optical.

4. USB Audio In – For connecting to PC/Mac computers for USB Class 2.0 Audio playback. Please note that for Windows devices the Cambridge Audio

USB Audio driver must be installed.

5. Ground/Lift Switch – When connected to a PC via USB, and with the switch set to 'ground', the DacMagic 200M will ground itself via the USB

connection. Setting the switch to 'lift' will ground the device via an internal network to reduce hum in case of ground loops.

6. Bluetooth Antenna – Used for the wireless streaming of Bluetooth audio from most phones, tablets, and laptops.

7. DC 12V 2.0A Power Adaptor Socket – Note: Only use the power supply included with the DacMagic 200M.

Table of Contents