Bluetooth - Rokit iO 3D User Manual

Bluetooth

Turn Bluetooth on/off
Bluetooth drains your battery, so turn it off when not in use.
Open quick settings.
Tap the icon to switch on/off:
is on.
is off.
Pair with Bluetooth device
To connect with a new Bluetooth accessory or other device, you need to pair with it. You only need to do this once for each device.
Set the device you want to pair (accessory, computer, other phone etc.) to Bluetooth discovery mode so that your phone can find it. See the device manufacturer's
instructions.
● On your phone, go to Settings > Connected devices.
● Turn on Bluetooth .
● Tap on Bluetooth.
● Tap Pair new device.
As the phone searches for available devices, you'll see
Tap an available device to connect.
Do any of the following:
● If a pairing code appears on your phone and Bluetooth device, make sure that the codes match. (If they don't, tap Cancel, verify the name of the device that you want to
pair with and try again.)
● If your device shows a passkey (like 0000 or 1234), enter it on your phone. If you don't see a place to enter it, swipe down from the top of your screen and tap the
Bluetooth notification.
● If your device doesn't show a passkey and you must enter one for the device to pair, see the device manufacturers' instructions.
● Tap Pair on your phone AND tap the pairing prompt on the other device. If you don't confirm on both devices, pairing will fail.
● Set sharing options if you want to share contacts, phone audio, media audio or Internet access.
Use paired device
After pairing with a device, you'll need to set sharing options and then you can use Bluetooth to:
● Make or receive calls with a headset
● Make or receive calls and play music over your car's audio system
● Transfer music
● Share photos
● Share contacts
● Share your phone's internet connection with your computer
Reconnect with Bluetooth device
● Open quick settings and tap
● Turn on the Bluetooth device.
.
to turn it on.
80
iO 3D User Manual