Installations and connections
Installing the ink film
1
Press the control panel open button (
control panel (
).
2
Control panel
2
2
Take out the ink film from the bag, and find the "T"
shaped gear (blue).
"T" shaped
New ink film
gear (blue)
3
Hold the ink film like in the picture below.
Insert the blue core into the right slot of the main
1
unit.
Insert the "T" shaped gear (blue) into the left slot
2
of the main unit.
"T" shaped gear (blue)
2
4
1
) to open the
1
Right slot
1
Blue core
4
Insert the white core into the slots shown in the
picture below.
White core
5
If the ink film is slack, tighten it by winding the gear.
"T" shaped
gear (blue)
6
Close the control panel by pressing down on both
sides.
Make sure to close the control panel until it locks.
Click
White core
Ink film is slack.