Installations and connections
Installing the ink film
1
Open the control panel.
Control panel
Open the control
2
panel until it locks.
2
Insert the ink film.
Find the "T" shaped gear (blue).
1
Insert the blue core into the right slot of the main unit.
2
Insert the "T" shaped gear (blue) into the left slot of
3
the main unit.
"T" shaped
gear (blue)
3
4
Press
1
here.
Ink film
Blue core
4
Insert the white core into the slots shown in the
picture below.
5
If the ink film is slack, tighten it by winding the "T"
shaped gear.
3
Close the control panel until it locks.
Right slot
2
White core
"T" shaped gear (blue)
Do not be
slacken.