Page 1
QUICK SETUP GUIDE Charging Dock for Oculus® Quest 2 NS-Q2CS PACKAGE CONTENTS • Charging Dock • 2 Rechargeable Battery Packs • 2 Custom Battery Doors • 1 Magnetic USB-C plug • 1 AC Adapter • Quick Setup Guide Before using your new product, please read these instructions to prevent any damage.
FEATURES Charges 2 Oculus touch controllers and headset simultaneously 1200mAh batteries extend your game time Stylish stand holds and displays your touch controllers and headset Rechargeable batteries eliminate costly disposable batteries LED lights display charging status Automatic shut o after controllers and headset are fully charged Powered by AC adapter Fully UL-certi ed battery cell SAFETY INFORMATION...
INSTALLING THE BATTERY PACKS 1. Remove the original battery door from controllers. 2. Install the rechargeable battery pack making sure you have it aligned with the correct polarity. Slide the custom battery door onto the controller. 3. Place the Touch controllers into the charging dock.
USING THE CHARGING DOCK 1. Separate the magnetic USB-C plug from the magnetic output connector of the charging dock. 2. Insert the magnetic USB-C plug into the USB-C charging port of your headset. Note: The magnetic USB-C plug is small and easy to lose. We recommend that you keep the magnetic USB-C plugged into the headset.
Page 5
3. Place your headset into the charging dock and make sure that the magnetic USB-C plug adheres to the magnetic output connector. 4. Plug the AC adapter into a power outlet, then connect the AC power adapter to the jack on the back of the charging dock. >>>...
SPECIFICATIONS Battery capacity 1200mAh Battery type Ni-MH LSD battery 4 ft. (1.2 m) Cable Length Input DC 5V 3A Output Headset 5V 2.1A Max Touch controllers 1.5V 500mA Max x 2 Dimensions Charging Dock 7.5 x 8.7 x 2.3 in. (19 x 22 x 5.9 cm) Rechargeable Battery Pack 1.97 x 0.78 x 0.98 in.
LEGAL NOTICES FCC Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the NS-Q2CS and is the answer not in the manual?
Questions and answers