Service manual for portable washer
5. HOW TO DISASSEMBLY THE UNIT
Note: This guide is just for Model MAE70-S1402GPS/M-13. The structure of all other m odels
is very close but a little different to this one.
Steps
1
Remove the
Rear Cover
2
Remove
Grounding
screws
3
Remove motor
capacitor.
4
Check and
remove the
water level
sensor pipe
5
Wiring
connection.
-------------------------------------------------------------------------------------------------------------------------------------------------------
Description
- 25 -
Midea America Company
Tools needed
Disassemble the 4 screws
fixing the Rear Cover on the
back of the unit with Phillips
screwdriver.
Phillips screwdriver
Remove the screws fixing the
capacitor house with Phillips
screwdriver.
No tools needed.
Pull the cap of connection to
release the wires with plier.
There are two type of caps,
Big one and Small one:
Part No.:
Small 301120770323
Big: 301102000004