Panasonic KX-TD1232E User Manual page 157

Button Descriptions
Your PS has the useful function buttons listed below. These buttons make operations simple.
INT'
INTERCOM Button: Used to make
or receive intercom calls.
TALK Button: Used to make, receive
or end calls.
CANCEL Button: Used to end calls,
C
or exit the directory or Function
mode.
CLEAR / TRANSFER Button: Used
CLR
to clear incorrect digits while
entering numbers or transfer a call
to another extension.
HOLD Button: Used to place a call
on hold.
FUNCTION Button: Used to enter
into the Function mode or access
features by pressing additional keys.
AUTO / OK Button: Used for System
OK
Speed Dialling and storing program
changes.
REDIAL Button: Used to redial the
last number dialled.
Combination Buttons*
Some special features can be used by combining two buttons.
PAUSE Button (
Used to insert a pause in
numbers.
FWD/DND Button (
ABC
Used to set the Call Forwarding
or Do Not Disturb (DND)
features.
MESSAGE Button (
DEF
Used to leave a message waiting
indication or call back the party
who left the message waiting
indication.
F1-F3
):
):
):
* These buttons can also be activated using the
Flexible CO Buttons (F1 through F3):
Used to make or receive an outside
call. A Loop-CO button is already
assigned to F1 button. Pressing this
button seizes an idle line
automatically.
F2 and F3 button can be used as
the desired function buttons. (Button
assignment is required.)
If the term is in parentheses like
(Save), it means this button has
been made into an "Save" button.
BOOK Button: Used to enter into the
directory mode or select a menu in
the Function mode.
FLASH Button: Used to disconnect
a current call and make another call.
Power Switch: Used to switch the
power ON ( ) or OFF ( ).
Volume Control Button: Used to
select the ringer volume (seven
levels, off and vibration mode) during
on-hook or ringing status, or receiver
volume (three levels) during a
conversation. The volume levels are
indicated by the number of asterisks
on the display.
CONF (Conference) Button (
GHI
Used to establish a three party
conversation.
TONE Button: Used to change the
JKL
dialling mode temporarily to tone.
display. Refer to "Operation – Selecting the
Feature Buttons on the Display".
DECT Portable Station
):
5-7