Table of Contents
Advertisement
Sub-Addressing
Using Manual Number Dialling
Use
SUB-ADDR
to separate the Telephone number and the Sub-Address.
Make sure that the FAX lamp is ON. If not, press
1
a
Place original(s) face up on the ADF.
1
b
Place a book or an original face down on the Platen
Glass.
2
Enter the telephone number, press
then enter the Sub-Address (up to 20 digits).
(Up to 36 digits including telephone number,
pauses, spaces, FLASH and Sub-Address)
Ex: Telephone number = 5551234, Sub-
Address=2762
Enter as:
SUB-ADDR 2 7 6 2
3
The documnet is stored into memory and your
machine starts to dial the number of the station and
sends
the
information.
(see Note 1) (see Note 2) (see Note 3)
NOTE
FLASH
1.
separates the Sub-Address from the Telephone number and is indicated by an "s" in the display.
2. Manual Off-Hook or On-Hook Dialling cannot be used with the Sub-Addressed Transmission.
3. The Sub-Address is not transmitted during Manual Redial Mode.
or
SUB-ADDR
5 5 5 1 2 3 4
document(s)
with
Sub-Addressing
NETWORK FEATURE
to select the "FAX MODE".
MEMORY XMT
5551234
2762
S
AMERICA
ASIA
AFRICA
BERLIN
ANTARCTICA BRAZIL
APOLLO
CANADA
MEMORY XMT
JOB
STATUS
XMT MODE ORIGINAL
STN(S):0000
CHINA
1/1
LIGHTER DARKER
149
Advertisement
Table of Contents
