Checks Before Starting The Machine - MADER E-MT370C Operating Instructions Manual

CHECKS BEFORE STARTING THE MACHINE

Check oil level, following the instructions in the engine operating manual. To ensure correct lubrication,
especially when working on slopes, the oil level should be at maximum.
Should the oil spill off, use the quality and density as prescribed in the same operating manual. Check oil
lever in the gearbox through oil plug A (fig 18), verify that the levels is between the two grooves B and C, if
necessary, add oil AGIP ROTRA MP SAE 80W/90 (rif US.A.MIL-L-2015C) (for high pressures). Fill tank with
fuel using a funnel with a mesh filter to eliminate impurities. Never fill the tank whilst engine is running.
After having performed these operations the machine is ready to be started.
44