MADER E-MT370C Operating Instructions Manual page 44

IMPLEMENT ASSEMBLY
As the two-wheel tractors are equipped with an automatic reverser, if you turn the handlebar of 180 degree
you get two forward speeds, that, pulling red lever M (fig 16) on the handlebar, become reverse speed.
P.T.O.
It is a front locking 3 –teeth implement. It rotates right, independently from the gear, and depending on the
motor speed (990 rev/1' at 3600 rev/1' of the motor). For the scheme and the flange dimension, please
refer to figure 17/1.
43