Electrical Connections - Panasonic CQ-5100U Operating Instructions Manual

Electrical Connections

Caution
• This wiring information is for experienced technical individual, for safety reason, please your dealer wire this
connection.
• This product is designed to operate with a 12 V DC, negative @ ground battery system.
• To prevent damage to the unit, be sure to follow the connection diagram below.
• Do not insert the power connector into the unit until the wiring is completed.
• Be sure to insulate any exposed wires from a possible short-circuit from the vehicle chassis. Bundle all cables and
keep cable terminals free from touching any metal parts.
• Remember, if your vehicle has a drive computer or a navigation computer, the data of its memory maybe erased
when the battery terminals are disconnected.
❐ Wiring Diagram
Antenna
※
The power connector does not come
along with the unit. If need, please
consult your dealer.
(white)
(White/Black)
Left Speaker
(Front)
Power Connector
(Gray/Black)
(Gray)
(Green/Black)
Right Speaker
(Front)
3
1
2
Accessory Power(ACC)
(Red)
ACC
(+12V DC, negative @ ground
only)
Ground Lead
(Black)
Ground
(Connect to a clean, bare
metallic part of your vehicle)
(Yellow)
Battery
Battery Lead
(Connect to vehicle battery)
(Violet/Black)
(Green) (Violet)
Left Speaker Right Speaker
(Rear) (Rear)
Fuse (15 A) Refer fuse
replacement to your nearest
authorized Panasonic
Servicenter. Do not try fuse
replacement by yourself.
CQ-5100U
27