Electrical Connections - Panasonic CQ-DF302W Operating Instructions Manual

Electrical Connections

Cautions:
≥ This product is designed to operate of a 12 V DC, negative ground battery system.
≥ To prevent damage to the unit, be sure to follow the wiring diagram on the next page.
≥ Remove approx. 5 mm of protective covering from the ends of the leads before connecting.
≥ Do not insert the power connector into the unit until the wiring is completed.
≥ Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all cables
and keep cable terminals free from touching any metal parts.
≥ Remember, if your car has a drive computer or a navigation computer, the data of its memory may be
erased when the battery terminals are disconnected.
Accessory used for wiring
No. Item
Power connector
6
Recommended external amplifier combination (example)
≥ Pre-amp out (rear/front) [CY-M9054 (4 channels system)]
≥ Subwoofer out [CY-M9054 (2 channels system) or CY-M7052 (1 channel system)]
Q'ty
1
(Continued to the next page.)
CQ-DF302W
E E
N N
G G
L L
I I
S S
H H
16
25