Display Messages - Casio Exilim EX-S100 User Manual

APPENDIX

Display Messages

Alarm setting This message appears after you change the alarm
complete. setting.
Battery is low. The battery is dead.
Cannot correct Keystone correction cannot be performed for some
image! reason. The image will be stored as-is, without
correction (page 89).
Can not find the file. The camera cannot find a image specified by the
slideshow "Images" setting. Specify another image
(page 116).
Cannot register any • You are attempting to save a BESTSHOT user
more files. setup when the "SCENE" folder already contains
999 setups (page 82).
• You are attempting to copy a FAVORITE file
when the "FAVORITE" folder already contains
9999 files (page 128).
Card ERROR Some problem occurred with the memory card.
Turn off the camera, and remove and then reinsert
the memory card. If the same message appears,
format the memory card (page 147).
IMPORTANT!
Formatting the memory card deletes all files on
the memory card. Before formatting, try
transferring recoverable files to a computer or
some other storage device.
Check connections! You are trying to print on the printer over an
incompatible USB connection.
File could not be The battery is dead, so the recorded image could
saved because not be saved.
battery is low.
Folder cannot be This message appears when you try to record an
created. image while there are 9,999 files stored in the
999th folder. If you want to record more files,
delete files you no longer need (page 124).
LENS ERROR If the lens comes into contact with some obstacle
while it is extending, this message appears, the lens
retracts, and the camera turns off. Take action to
remove the obstacle, and try turning on power again.
Load paper! The camera is in the Printer mode, and the printer
is out of paper.
Memory Full Memory is full. If you want to record more files,
delete files you no longer need (page 124).
No Favorites file! There is no FAVORITE file.
Printing Error One of the following problems occurred during
printing.
• Printer power off
• Printer internal error
201