Installations And Connections - Panasonic KX-PW93CW Quick Reference Manual

Installations and connections

Installing the ink film
1
Open the control panel.
Open the control
2
panel until it locks.
2
Insert the ink film.
Find the "T" shaped gear (blue).
Insert the "T" shaped gear (blue)
2
into the left slot of the main unit.
4
Press here.
1
Control panel
Ink film
Insert the blue core
1
into the right slot of
the main unit.
Right slot
Blue core
3 Insert the white core into the slots.
3
If the ink film is slack, tighten it by winding the "T"
shaped gear.
4
Close the control panel until it locks.
Click
When the unit runs out of ink film, the following
G
message will be displayed.
ﾌ ｨ ﾙ ﾑ ｶ ﾞ ｼ ﾅ ｸ ﾅ ﾘ ﾏ ｼ ﾀ
ｺ ｳ ｶ ﾝ ｼ ﾃ ｸ ﾀ ﾞ ｻ ｲ ｼ U 2 3
Install a new ink film.
Replacement ink film:
KX-FAN141 (50 m)
As of May 2003.
・ ・
Do not
be slacken.
ﾌ ｨ ﾙ ﾑ ｶ ﾞ ｼ ﾅ ｸ ﾅ ﾘ ﾏ ｼ ﾀ
ﾋ ﾝ ﾊ ﾞ ﾝ : K X - F A N 14 1
¥1400
Tax not included.