ASSEMBLY INSTRUCTION
Thank You
FOR CHOOSING FELTON INDUSTRIES
6mtr ELITE PORTABLE GRANDSTAND
[Code No: FELEPG5T6]
"This product has been
manufactured in Australia to the
highest quality standard,
guaranteeing proven quality,
durability and low maintenance"
1800 22 00 55
1800 05 91 58
sales@felton.net.au
www.felton.net.au
Felton Industries Pty Ltd | ABN: 17 130 687 240
Page 1 of 2
WARNING: This assembly required two or more people as lifting is involved. Please ensure bolts and nuts are only finger-tightened throughout assembly for flexibility in
lining up components. Bolt and nuts should be securely tightened in place when instructed to do so. Please check all components are included before proceeding with the
assembly
ITEM
DESCRIPTION
1
FELEPG5T6_BASE FRAME
2
FELEPG5T6_GROUND CHANNEL
3
FELEPG5T6_PLANK L3075
4
FELEPG5T6_PLANK L4975
5
FELEPG5T6_SKIRTING BOARD L3000
6
FELEPG5T6_SKIRTING BOARD L1510
7
FELEPG5T6_STAIR PLANK L1432
8
AS-NZS 2465 Bolt - 1/4" x 1"
9
AS-NZS NYLON Nut - 1/4"
10
AS-NZS 2465 Bolt - 1/2" x 3.5"
11
AS-FLAT WASHER - 1/2"
12
AS-NZS NYLON Nut - 1/2"
13
AS-Screw-ST4.5x25
14
AS 1112 Bolt - 3/8" x 3"
15
AS 1112 Nut - 3/8"
1
Attach five base frames
to three ground channels
nuts
as illustrated.
3
5
6
Fasten ten long skirting boards
and six short skirting boards
all base frames by using self-tapping screws
. Ensure that boards
from joining points as inllusrated towards outer ends to avoid length shortage.
Qty
5
3
18
4
10
6
4
244
244
37
98
49
84
16
16
2
by using bolts
, washers
and
Attach eighteen short planks
bolts
and nuts
4
Attach four stair planks
firmly onto virtical tubes on
&
are fastened
4
and four long planks
onto five base frames
as illustrated. Note that all planks should be attached from top to bottom.
onto base frames by using bolts
and nuts
3
by using
as illustrated.