felton industries FELAWS Quick Start Manual

WARNING: READ THE ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THE ACCESS WHEELCHAIR SETTING.
Make sure to wear protective gloves and foot protection when installing and assembling this product. Unpack the unit and make sure all the components are
included before proceeding. This activity requires two o more people as lifting is involved. Please ensure all bolts are only finger-tighten during the assembling
process for flexibility in lining up components. Securely tighten the bolts before anchoring the product to the ground.
ACCESS WHEELCHAIR SETTING
(CODE No. FELAWS)
Thank you for purchasing our high quality products. The Access Wheelchair Setting has been manufactured with certified materials, to achieve high reliability and minimum maintenance. It is our
commitment to provide you cost effective solutions for outdoor applications.
[FELAWS1]
[FELAWS2]
[FELAWS4]
[FELAWS3]
ITEM PART
FELAWS1 CENTRAL SEAT FRAME
FELAWS2
FELAWS3 445 mm.—SEAT PLANK
FELAWS4 2400 mm.—TABLE PLANK
FELAWS5 M6X25 mm. HEXAGONAL HEAD BOLT
FELAWS6
FELAWS 1 FELAWS 2
[FELAWS2]
A. Place the 3 table planks (FELAWS4) upside down on a flat surface and
attached them to the main frames (FELAWS 1 & 2), by using hexagonal
head bolts (FELAWS 5) and locknuts (FELAWS 6) - finger tighten.
[FELAWS6)
[FELAWS5)
DESCRIPTION
SIDE SEAT FRAME
M6 LOCKNUT
FELAWS 5
FELAWS3/4
[FELAWS5x4]
[FELAWS6x4]
A. Turn the whole assembly up and attach the short
seat planks (FELAWS3) to central and side frames
(FELAWS 1&2), by using hexagonal head bolts
(FELAWS5) and locknuts (FELAWS6) as shown in
the illustration above - finger tighten.
QTY
1
2
2
3
52
52
FELAWS6
1
2
P1