felton industries FELIGB3 Assembling Instructions

WARNING: READ THE ASSEMBLING INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THE IN-GROUND BENCH SEAT WITH BACK REST.
Make sure to wear protective gloves and foot protection when installing and assembling this product. Unpack the unit and make sure all the components are
included before proceeding. This activity requires two o more people as lifting is involved. Please ensure bolts are only finger-tightened during the assembling
process for flexibility in lining up components. Securely tighten the bolts before anchoring the product to the ground.
3m- IN GROUND BENCH SEAT WITH BACK REST
(CODE No. FELIGB3)
Thank you for purchasing our high quality products. The In-ground Bench Seat with Back Rest has been well manufactured with certifieed materials to achieee high reliability and minimum mainte
nance. It is our commitment to proeide you cost-effectiee solutions for outdoor applications.
[IGBR2]
[IGBR1]
[IGBR1] [IGBR3]
[IGBR1]
[IGBR1]
[IGBR5x2]
[IGBR4x2]
ITEM PART
IGBR1
IGBR2 3000 mm.—SEAT ALUMINIUM PLANK
IGBR3 3000 mm.—ALUMINIUM BACK REST
IGBR4 M6x25mm. HEXAGONAL HEAD BOLT
IGBR5
IGBR1 IGBR2
A. Attach the back rest plank [IGBR3] to the top of the seat frame plate
(IGBR1), by using hexagonal bolts [IGBR4] and locknuts [IGBR5], as
illustrated - finger tighten.
B. Tight both, the back rest and seat bolts with spans, wrench and /or a
proper tool.
DESCRIPTION
SEAT FRAME
M6 LOCKNUT
IGBR4
IGBR3
[IGBR5x4]
[IGBR4x4]
A. Place the three seat frames [IGBR1] and attached
them to the seat plank [IGBR2], by using hexagonal
bolts [IGB4] and locknuts [IGB5] — finger tighten.
Hex bolt
ASSEMBLED BACK REST
QTY
3
1
1
18
18
IGBR5
1
2
Back rest
Lock nut
P1