WARNING: READ THE ASSEMBLING INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THE WALL MOUNTED SPECTATOR SEATING.
Make sure to wear protective gloves and foot protection when installing and assembling this product. Unpack the unit and make sure all the components are
included before proceeding. This activity requires two o more people as lifting is involved. Please ensure bolts are only finger tightened during the assembling
process for flexibility in lining up components. Securely tighten the bolts before anchoring the product to the ground.
WALL MOUNTED SPECTATOR SEATING
PRODUCT CODE (3TGS9)
1
[3TGW5x4]
2
[3TGW5x4]
PART No.
3TGW1
3TGW2
3TGW3
4000mm.-SEATING PLANK
3TGW4
M10x35mm. CUP HEAD BOLT
3TGW5
M6x25 mm. HEX. HEAD BOLT
3TGW6
3TGW7
3TGW8
M10 PLAIN WASHER
[3TGW6x4]
1
[3TGW1]
[3TGW6x4]
[3TGW1]
PART NAME
QTY
MAIN FRAME
4
FLAT BAR
3
6
12
[3TSW1]
96
96
M6 LOCKNUT
M10 LOCKNUT
12
[3TSW6/7]
12
[3TGW6x4]
[3TGW5x4]
2
1
3
[3TGW6x4]
[3TGW5x4]
[3TGW3]
[3TGW8]
[3TGW5]
A. Have two external frames
[3TGW1] in place (STEP 1),
with lugs facing inwards
and secure them to the
back and front seating
planks [3TGW3] (STEP2),
by using hexagonal head
bolts [3TGW5] and lock-
nuts
2
tighten .
B. Install the central frames
[3TGW1]
secure it to the seating
planks, by using hexagonal
head bolts [3TGW5] and
[3TGW1]
locknuts [3TGW76] -finger
tighten .
A. Install the rest of the of the back
and front seating planks [3TGW3]
as illustrated (STEP 4). Secure the
seating planks [3TGW3] to the
frames, by using hexagonal head
bolts
[3TGW5]
[3TGW6] -finger tighten.
4
B. Repeat the previous process with
the two central seating planks
5
[3TGW3] as illustrated (STEP 5).
C. Install the central frame [3TGW1]
as shown (STEP5), and secure it
4
to the seating planks, by using
hexagonal head bolts [3TGW5]
and locknuts [3TGW6] -finger
tighten.
[3TGW1]
[1]
[3TGW2]
[3TGW4]
[3TGW76]
-finger
(STEP3), and
and locknuts
P1