What's In The Box; Tools Of The Trade; Installation - Orion Coaxial Speaker XTR402 Owner's Manual

WHAT'S IN THE BOX

Included in this box are all the necessary mounting hardware and cables for your basic
installation. Listed below is a detailed list of the components included in this system
package.
Quantity
1
1
2
2

TOOLS OF THE TRADE

Listed are the majority of the tools required to perform the installation. Having
the proper tools will make the installation much easier. Some of these tools are
required.
• marking pen
• wire crimpers
• volt-ohm meter (opt.)
• 1/8" drill bit
• assorted tin snips
• Phillips screwdriver
• 41/8" (105mm) hole saw (4"Coaxial installation)
• 43/4" (120mm) hole saw (5.25"Coaxial installation)
• 51/8" (130mm) hole saw (6" & 6.5" Coaxial installation)

INSTALLATION

The performance of the XTR coaxial speakers is directly proportional to the quality of
installation. Care taken during the installation process will be rewarded with years of
satisfying performance. If you are unsure about your installation capabilities, please
refer to your local Authorized Orion Dealer for technical assistance. Orion dealers are
trained professionals dedicated to obtaining the maximum performance out of your
Orion system. If you decide to install this speaker system yourself, please read the
entire installation section before starting your installation.
2
Model Number:
Serial Number:
Date of Purchase:
Description
Owner's Manual
Mounting template
XTR Coaxial Speakers
Grilles (except for 4", 4"x6", 5"x7")
Mounting Screws
____________________________
____________________________
____________________________
• needle nose pliers
• electric drill
• wire strippers
• wire cutters
• hole saw arbor
© 2008 directed electronics—all rights reserved