How To Clean: Cavity Embossment; How To Remove: Shelf Supports; How To Use: Pyrolytic Cleaning - AEG BPE556360M User Manual

CARE AND CLEANING
Clean all accessories after each use and let them dry. Use a soft cloth with
warm water and a mild detergent. Do not clean the accessories in a dishwash‐
er.
Do not clean the non-stick accessories using abrasive cleaner or sharp-edged
Accessories
objects.

11.2 How to clean: Cavity embossment

Clean the cavity embossment to remove limestone residue after cooking with steam.
Step 1
Pour: 250 ml of white vinegar
into the cavity embossment.
Use maximum 6% vinegar
without any additives.
For the function: Humidity Low clean the oven for every 5 - 10 cooking cycles.

11.3 How to remove: Shelf supports

Remove the shelf supports to clean the oven.
Step 1 Turn off the oven and wait until
it is cold.
Step 2 Pull the front of the shelf sup‐
port away from the side wall.
Step 3 Pull the rear end of the shelf
support away from the side wall
and remove it.
Step 4 Install the shelf supports in the
opposite sequence.
The retaining pins on the tele‐
scopic runners must point to the
front.

11.4 How to use: Pyrolytic Cleaning

Clean the oven with Pyrolytic Cleaning.
184/744
Step 2
Let the vinegar dissolve the
limestone residue at the ambi‐
ent temperature for 30 mi‐
nutes.
Step 3
Clean the cavity with warm
water and a soft cloth.
1
2