Onkyo TX-DS656 Instruction Manual page 43

Recording from a source
Display
SYSTEM
STAND-BY
POWER
ON OFF
SPEAKERS
MAIN REMOTE
REC OUT
DIGITAL AUDIO
SELECTOR MUL TI CH INPUT
PHONES VIDEO / 3 VIDEO CAM INPUT
DVD VIDEO-1 VIDEO-2 VIDEO-3
VCR-1 VCR-2 / TV
CAM
S VIDEO VIDEO L AUDIO R(MONO)
Source selector buttons
PHONES
S VIDEO
Video camera/TV game machine
a
** Input Selector **
Picture
Sound
TAPE-2 Moni. = OFF
Input Mode=Digital-2
Surround
Mode= LIVE
ENTER
MASTER VOLUME
SMART SCAN CONTROLLER
PRESET
TUNING
SURROUND
ENTER
PARAMETER
3-D BASS
MIDNIGHT
MULTI SOURCE Re-EQ
THEATER
MIN MAX
PTY/TP DISPLAY CHARACTER AUTO TUN SCAN GROUP MEMORY FM MUTE / MODE
BASS TREBLE
CLEAR
TAPE-1 TAPE-2 FM AM PHONO CD
M D MONITOR
AUDIO VIDEO CONTROL RECEIVER TX-DS
VIDEO / 3 VIDEO CAM INPUT
VIDEO L AUDIO R(MONO)
= VIDEO-3
= CD
Using the front panel
1. Press the REC OUT button.
The REC OUT indicator flashes for 8 seconds.
SPEAKERS MAIN
V - 1
2. While the REC OUT indicator is flashing, select the recording
source using the source selector buttons.
The REC OUT indicator and the selected recording source name flash.
SPEAKERS MAIN
V - 1
656
Indication Video recording
D
V1
V2
V3
3. Start recording on the recording equipment, then start playing
the selected source.
Now the recording source will not change even if you change the
input source by using the source selector buttons.
To set the source selected as the recording source using the source
selector buttons...
In step 1, press the REC OUT button again while the REC OUT
indicator is flashing.
Adding sound to video camera images
You can add music from CDs or other source to video images from a
video camera. The following explanation assumes that you are adding
sound from a CD player to images from a video camera connected to
the VIDEO-3/VIDEO CAM INPUT connectors.
In the following procedure, use the remote controller unless otherwise
specified.
1. Connect a video camera to the VIDEO 3/VIDEO CAM INPUT
connector.
2. Press the ENTER button.
The Menu appears on the TV screen.
3. Select "Input Selector" using the y or u cursor button, then
press the s cursor button.
The Input Selector screen appears.
4. Select "Picture" using the y or u button and then select
"VIDEO-3" using the a or s cursor button.
5. Select "Sound" using the y or u button and then select "CD"
using the a or s cursor button. (a)
6. Press the ENTER button.
7. Start recording on the video cassette recorder, then start
playback on the CD player and the video camera.
SURROUND MODE HALL 3 - DB
STEREO
REC OUT
Flashing
SURROUND MODE HALL 3 - DB
STEREO
REC OUT
Playback source
Recording source
Indication
source
DVD CD
VIDEO-1 T1
VIDEO-2 T2
VIDEO-3 TU
PH
Audio recording
source
CD
TAPE-1
TAPE-2
FM or AM
PHONO
43