Using Memory Functions - Onkyo DX-C370 Instruction Manual

Using memory functions

1
MEMORY CLEAR
2
DISC 1
3
/
REMOTE CONTROLLER RC-331C
4
14
1 2 3
POWER
6 7 8
CUSTOM
+10
FILE
ON OFF
REMOTE CONTROLLER RC-331C
DISC 2 DISC 3 DISC 4 DISC 5
DISC 1 DISC 2
DISC 4 DISC 5
REMOTE CONTROLLER RC-331C
/
MEMORY CLEAR
1 2 3
4 5 6
7 8 9
+10 0
PLAY
REMOTE CONTROLLER RC-331C
1
3
NEXT SELECTION OPEN/CLOSE
4 5
9 0 DISPLAY
ERASE MEMORY CLEAR DISC SKIP
6 DISC
FIVE CD EXCHANGE CONTINUOUS PLAY
Storing a program into memory and
playing it
MEMORY
Up to 40 tracks can be stored in memory.
1. Press the MEMORY button.
2. Select the desired disc using the Direct Play buttons
DISC 6
3. Use the
DISC 3
You can use the number buttons on the remote controller to
select a track number. In this case, you do not need to press
DISC 6
the MEMORY button.
4. Press the
MEMORY
NOTES:
Stopping a memory playback
Press the
4
PAUSE STOP PLAY
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC 6
DX-C540
COMPACT DISC CHANGER
2
The MEMORY indicator will light up.
(DISC 1-6).
You may also use the DISC SKIP button to select a disc.
If you wish to program the entire disc, select the desired
disc and press the MEMORY button. ("AL (all)" appears.)
To use the number buttons on the remote controller to se-
lect the entire disc, press the "0" button.
/ and
desired track, and then press the MEMORY button.
The selected tracks are stored in memory.
To store tracks on other discs into the memory, repeat steps
2 and 3.
Repeat Step 3 to select a track from the same disc.
If you attempt to select more than 40 tracks, "FULL" will
flash on the time display to indicate that the memory is
full.
PLAY button.
The CD changer will play the programmed tracks in the
order you selected.
If you press the MEMORY button during playback, the
track being played will be stored in memory. You can use
the number buttons to program more tracks.
You will need to select a disc each time you wish to pro-
gram a track from a non-current disc.
If the total remaining time is more than 99 minutes 59 sec-
onds or when the contents of the memory extends to 2 or
more discs, "--:--" will be displayed.
If a selected disc or track does not exist, the corresponding
indicator (disc or track) will light up and the selection will be
included in the program count, but the selection(s) will be
ignored and the subsequent disc or track in the program will
play.
STOP button.
/ buttons to select the