Using Memory Playback - Onkyo DX-C390 Instruction Manual

DX-C390̲En.book Page 22 Wednesday, August 27, 2003 5:49 PM
Advanced Playback
ON
1
4
7
SEARCH
>10
FOLDER
/
NEXT SELECTION
DISC 1
DISC 1–6
DISC 4

Using Memory Playback

With the Memory function you can create a playlist of up
to 40 of your favorite tracks, discs, or folders.
1
While playback is stopped, press
the [MEMORY] button.
Remote
controller
The MEMORY indicator appears.
MEMORY
MEMORY
2
Use the DISC SELECT buttons to
select a disc.
Remote
controller
DISC 1 DISC 2 DISC 3
DISC
MEMORY
DISC 4 DISC 5 DISC 6
"ALL," which means all tracks on the
disc, appears on the display.
To add the entire disc to the playlist,
press the [MEMORY] button.
3
To select a track, use the [
[ ] buttons.
Remote
controller To select an individual track or a folder
on an MP3 disc, you can use either
Navigation mode or All Folder mode,
as explained on page 17 respectively.
You can also select tracks and folders
by using the number buttons (as
explained on page 18). In this case, the
item is added to the playlist once
you've entered the track number.
If you want to add all the MP3 tracks in
a folder, simply select that folder.
22
—Continued
STANDBY OPEN / CLOSE
2 3
REPEAT
5 6
CLEAR
RANDOM
8 9
MEMORY
MEMORY
10/0 CLEAR
PLAY
FOLDER
/
DISC 2 DISC 3 DISC
DISC 5 DISC 6
TRACK
]/
4
Press the [MEMORY] button to
add the selected track or folder to
Remote
controller
the playlist.
MEMORY
TRACK
After two seconds, the total playlist
time is displayed.
TRACK
Repeat steps 2 through 4 to add more
tracks, discs, or folders to your playlist.
If you try to add more than 40 items, the
message "FULL" will flash on the dis-
play.
5
Press the PLAY [ ] button.
Remote
Items in the playlist are played in the
controller
order in which they were added.
Notes:
• During memory playback, the total remaining time
will be the remaining time of the playlist. However, if
the total remaining time exceeds 99 minutes and 59
seconds, the playlist contains items from two or more
discs, or contains one or more MP3 tracks, the total
remaining time cannot be displayed and "--:--" will be
shown instead.
• If you specify a track or disc that does not exist, it will
be added to the playlist, but ignored during memory
playback.
TOTAL REMAIN