Advertisement
4.1.3.
When the charge is complete, the charging indicator will turn off.
4.1.4.
When charging is complete, disconnect the charging lead from the power supply and from the charging port.
4.1.5.
When connected to a wireless signal, the WiFi Indicator will show green.
4.2.
SOFTWARE FOR BORESCOPE
4.2.1.
For an IOS device use APP Store to download the "WiFi Check" application
4.2.2.
For an Android device, use Google Play to download the "WiFi Check" application and install it.
4.2.3.
For a PC, download the software from http://app.joyhonest.com/wifi_check_pc.html and install it.
4.2.4.
Connect borescope as fig.2 and turn on using On/Off button (fig.1).
4.2.5.
Search for the WiFi signal " WiFi Check" on your device and connect to it.
4.3.
RUNNING THE SOFTWARE
4.3.1.
Open the installed software and start real-time viewing.
4.3.2.
Use the software controls to set up and record your work.
4.3.3.
Control options are shown in fig.3 below.
4.3.4.
Image brightness can be altered using the roller switch (fig.2).
fig.3
8
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
BATTERY REMOVAL
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme. Jack
Sealey Ltd Batteries Producer Registration Number (BPRN) is BPRN00705.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
Take Photo
Record Video
Photo &Video
Rotate image
Mirror Reverse
Resolution
01284 703534
sales@sealey.co.uk
Original Language Version
and install it.
fig.2
WiFi Unit
Image brightness control
www.sealey.co.uk
VS8113 Issue 2 (3)
Probe
09/12/21
Advertisement
