Advertisement
Quick Links
Advertisement
Related Manuals for CT RAD micro Series
Summary of Contents for CT RAD micro Series
- Page 1 U S ER GUIDE CT RAD micro series ™...
-
Page 2: Table Of Contents
CONTENTS CONTENTS .......................... 3 FEATURES AND SPECIFICATIONS ..................4 PRODUCT INSTALLATION AND MOUNTING ..............5 WINDAGE & ELEVATION ADJUSTMENTS ................6 MAINTENANCE AND TROUBLESHOOTING ............... 7 LENS CARE .........................6 WARRANTY ........................7 BATTERY WARNINGS ......................8 RAD micro series... -
Page 3: Contents
AND MANUALLY CHECK AND CLEAR THE CHAMBER AND ACTION OF AMMUNITION. MANUAL ON/OFF • Power On: With a battery installed, the CT RAD™ micro Series Sight will power on and adjust brightness automatically. • Storage: When not in use, it is recommended to store the CT RAD™... -
Page 4: Features And Specifications
CT RAD™ micro Series Sight with the included protective cover installed. • BATTERY: The CT RAD™ micro Series Sight is powered by a single CR1632 battery. This battery will provide most users with significant maintenance free service. -
Page 5: Product Installation And Mounting
The CT RAD™ micro Series Sight is intended for use on handgun slides that are compatible with Shield RMS ® or JPoint ® footprints. The CT RAD™ micro Series Sight is compatible with most accessories and interfaces based on the pattern shown below. It is recommended that an experienced gun smith verify this product’s fit prior to making any... -
Page 6: Windage & Elevation Adjustments
Impact (POI). Should your impacts be below your point of aim, dial UP to reach zero. For additional information visit www.crimsontrace.com. LENS CARE The external optics of the CT RAD™ micro Series Sight are generally resistant to scratches and common firearm cleaning chemicals. Periodically the optics may become dirty from normal use, Crimson Trace recommends using the included microfiber cloth for cleaning. -
Page 7: Maintenance And Troubleshooting
MAINTENANCE AND TROUBLESHOOTING The CT RAD™ micro Series Sight requires minimal maintenance, the included CR1632 battery should provide extended service life for most users. Should your sight fail to power up, remove and replace the battery with a new CR1632 from a reputable manufacturer. Should problems persist, please contact Crimson Trace customer ®... -
Page 8: Battery Warnings
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and; (2) This device must accept any interference received, including interference that may cause undesired operation. RAD micro series... - Page 9 • When used correctly, batteries provide a safe and dependable source of portable power. However, misuse or abuse may result in leakage, fire, or explosion. • Batteries can explode or leak and cause burns if installed backwards, disassembled, charged, or exposed to water, fire or high temperature. •...
- Page 10 NOTES RAD micro series...
- Page 11 NOTES ELECTRONIC SIGHTS...
- Page 12 CRIMSON TRACE® HEADQUARTERS • 9780 SW FREEMAN DRIVE, WILSONVILLE, OR 97070 TELEPHONE: 800-442-2406 • FAX: 503-783-5334 • CRIMSONTRACE.COM © 2021 Crimson Trace® Corporation. All rights reserved. 27-3000032 REV002 06/21...
Need help?
Do you have a question about the RAD micro Series and is the answer not in the manual?
Questions and answers