SMART/RG SR616ac Quick Start Manual
  1. Manuals
  2. Brands
  3. SMART/RG Manuals
  4. Network Router
  5. SR616ac
  6. Quick start manual

SMART/RG SR616ac Quick Start Manual

Hide thumbs Also See for SR616ac:
Table of Contents

Advertisement

Quick Links

Download this manual
Quick Start Guide
SR616ac
This Quick Start Guide shows you how to set up and start using your new gateway.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SR616ac and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for SMART/RG SR616ac

Summary of Contents for SMART/RG SR616ac

  • Page 1 Quick Start Guide SR616ac This Quick Start Guide shows you how to set up and start using your new gateway.

  • Page 2: Installation

    Installation 1. Connect one end of the included phone cable to the DSL port on the gateway and connect the other end to the wall jack. 2. Connect one end of an Ethernet cable to a LAN port of the gateway and connect the other end to your PC. 3.
  • Page 3 DC/IN 3G USB Data Card / LTE RJ11 RJ45 Phone Phone Phone...

  • Page 4: Led Indicators

    LED INDICATORS The LEDs on the front of the SR616ac gateway can help you understand the current state of your adapter. White Green Legend: White blinking Green blinking Action Explanation All LEDs except those Feature enabled &/or working correctly listed below...

  • Page 5: Quick Gateway Configuration

    Quick Gateway Configuration Warning: Do not press the Reset button unless you want to clear the current settings. The Reset button is in a small cir- cular hole on the rear panel. If you want to restore the default settings, insert a thin wire (such as a paper clip) into the hole, press the Reset button for 1 second, and then release the button.

  • Page 6: Configuring The Wan Manually

    Note: Your service provider may use other settings. Contact your provider for details. Configuring the WAN manually If the automatic connect process is unsuccessful, refer to the Advanced Setup > Layer 2 Interface WAN Service sections of the SmartRG SR616ac Gateway User Manual to manually establish a connection.
  • Page 7 WiFi Setup Two methods, WPS and Manual, are available for WiFi setup. Perform the steps on this page first, and then follow the instructions for the applicable method. The default settings work for most situations. 1. In the left menu, click Wireless and then click 2.4 GHz Band...

  • Page 8: Wps Method

    WPS Method If the device you wish to connect to the Internet via your gateway supports the WPS secure Wi-Fi connection method, follow these steps. 1. In the left navigation bar, click Wireless, then click the band that you want to configure, and then click Secur- ity.

  • Page 9: Manual Method

    Manual Method Set up your gateway’s parameters first, then follow these steps. 1. In the left menu, click Wireless and then the band that you want to configure. 2. Click Security and scroll down to the Manual Setup AP section. 3.
  • Page 10 7. Click Apply / Save. 8. Follow the WiFi connection instructions provided with your client device to connect to the router. Use the SSID name you selected in Step 3 and enter the same passphrase that you entered in step 5 to set up the connection on your client device.

  • Page 11: Additional Support

    Record Your SR616ac Wi-Fi Settings Predefined wireless settings If you change the preset wireless settings WiFi network name (SSID) Network key (password) Additional Support If you require further instructions, please contact your local ISP Support. SMARTRG INC. ALL RIGHTS RESERVED. COPYRIGHT 2018 ©...

Table of Contents