Table of Contents
Advertisement
1. INTRODUCTION
1.1 Inspection
Examine the shipping carton for any sign of damage. Inspect the
unit and any accessories for damage. If there is any damage then
consult your distributor immediately.
1.2 Description
The PSI4000 and PSI4300 are Non-Contact Phase Detector and
Phase Sequence Indicators with the following features:
Non-contact connection clips to enhance user safety during
u
testing and also allow the testing of insulated conductors.
I lluminated LED's to indicate the detection of live phases.
u
R otating LED's and buzzer tones to indicate clockwise or
u
anticlockwise phase sequence.
Auto-off function after 5 minutes of non-detection.
u
Enhanced brightness switch to make the indication brighter in
u
strong ambient light.
Magnetic studs on rear casing to allow hands free operation.
u
The PSI4000 indicates correct phase sequence as a clockwise
rotation while the PSI4300 indicates correct phase sequence as an
anti-clockwise rotation.
1.3 Accessories (included)
4 x 1.5V batteries LR6/AA
u
Soft case
u
Instructions
u
1.4 Battery Installation
Refer to section 4.1 (battery replacement) for the battery
installation instructions for the PSI4000 / PSI4300.
1
Advertisement
Table of Contents
