Martindale Electric VT12 MK2 Instruction Manual

VT12 MK2
VOLTAGE INDICATOR
Instruction
Manual
GENERAL SAFETY INFORMATION: Always read before
proceeding.
Warning
These instructions contain both information and
warnings that are necessary for the safe operation and
maintenance of this product. It is recommended that
you read the instructions carefully and ensure that the
contents are fully understood. Failure to understand
and to comply with the warnings and instructions can
result in serious injury, damage or even death.
In order to avoid the danger of electrical shock, it is
important that proper safety measures are taken when
working with voltages exceeding 30V AC rms, 42V AC
peak or 60V DC.
This product must only be used by a competent
person capable of interpreting the results under the
conditions and for the purposes for which it has been
constructed. Particular attention should be paid to the
Warnings, Precautions and Technical Specifi cations.
Always check the unit is in good working order before
use and that there are no signs of damage to it. Do not
use if damaged.
Where applicable other safety measures such as use of
protective gloves, goggles etc. should be employed.
Please keep these instructions for future reference.
Updated instructions and product information are
available at: www.martindale-electric.co.uk
REMEMBER: SAFETY IS NO ACCIDENT
MEANING OF SYMBOLS:
Equipment complies with relevant EU
Directives
End of life disposal of this equipment
should be in accordance with relevant
EU Directives
Caution - risk of electric shock
Caution - risk of danger & refer to
instructions
Equipment protected by double or
reinforced insulation (Class II)
Suitable for live working