Msata Ssd - Lindy 20939 User Manual

User Manual English
Use the M3 nuts to fix M.2 NGFF SSD on the circuit board.
Note - If your M.2 SSD is a 2280 form factor, please ignore the above steps 1 - 3. Instead, use 2x M3*3
screws to fix M.2 NGFF SSD directly.

mSATA SSD:

Put the copper nut on the side of the mSATA connector. Fix with a M2*6mm screw from bottom to top.
Insert the mSATA SSD into mSATA 52pin connector. Press down mSATA SSD and line up the copper
nut hole.
Use the M2 nuts to fix mSATA SSD on the circuit board.
Remark:
If your mSATA SSD is Full Size, please ignore steps 1 - 3. Instead, use 2x M2*3 screws to fix mSATA
SSD directly.