Lindy 20939 User Manual page 3

User Manual
Introduction
Thank you for purchasing the M.2 & mSATA to 2.5" SATA Drive Enclosure. This product has been
designed to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free
lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future
reference.
Package Contents

2.5" Aluminium case with mSATA and M.2 SSD to 2.5" SATA adapter

Mounting screws and nuts for M.2 SSD: 1x M3*3 screw, 1x copper nut, 1x M3*5 screw, 1x M3 nut

Mounting screws and nuts for mSATA SSD: 3x M2*3 screw, 3x copper nut, 3x M2*6 screw, 3x M2
nut

Screws for the housing (5x M2*3) and the circuit board (5x M2*3)

This Manual
Features

Converts mSATA and M.2 to 2.5" SATA drive form factor

9.5mm high 2.5" aluminium case

100% compatible with 2.5" SATA drive mechanical specs

Supports SATA Rev.3.2 DEVSLP function

Supports SATA 6Gbps

Mini PCIe 52pin female and M.2 (NGFF) B key female connector

Supports M.2 type 2280, 2260, 2242, 2230 and mSATA half size/full size

22 pin SATA (signals and power) male connector
Note - If both M.2 and mSATA SSDs are installed simultaniously, only the M.2 SSD will work.
Installation
M.2 SSD:
Put 1x copper nut on the side of the M.2 connector. Fix with a M3*5mm screw from bottom to top.
Insert the M.2 SSD into M.2 67pin connector. Press down M.2 SSD and line up the copper nut hole.
English