Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for LTS Pro Series
Summary of Contents for LTS Pro Series
- Page 1 Industrial Router Pro Series LT-4GPOEW1 Quick Start Guide...
-
Page 2: Related Documents
This guide describes how to install the LT-4GPOEW1 and how to log in the Web GUI to configure the device. Once you complete the installation, refer to the LTS Industrial LT-4GPOEW1 User Guide for instructions on how to perform configurations on the device. -
Page 3: Packing List
1. Packing List Before you begin to install the LT-4GPOEW1 router, please check the package contents to verify that you have received the items below. 2 × Magnetic Cellular 1 × LT-4GPOEW1 1 × Ethernet Cable 1 × Power Adapter Antennas 1 ×... -
Page 4: Dimensions (Mm)
2. Hardware Introduction 2.1 Overview ① Main Cellular Antenna Connector ② GPS/WIFI Antenna Connector ③ AUX Cellular Antenna ④ LED Indicator Area POWER: Power Indicator SYSTEM: Status Indicator SIM : Status Indicator : Signal Strength Indicator ⑤ Serial Port & I/O ⑥... -
Page 5: Led Indicators
2.3 Connectors RS232 RS485* Description Digital Output Digital Input Ground Common Ground Receive Data Transmit Data Description Positive Negative *: Only for -485 model. 2.4 LED Indicators Indication Status Description The power is switched off POWER Power Status The power is switched on Static: Start-up Green Light SYSTEM... -
Page 6: Reset Button
(average signal strength) Static/Static/Static: strong signals with 21-31 ASU (signal is good) 2.5 Reset Button Reset button is under the SIM slots. Description Function SYSTEM LED Action Blinking Press and hold the reset button for more than 5 seconds. Static Green → Reset Release the button and wait. -
Page 7: Antenna Installation
3. Hardware Installation Environmental Requirements - Power Input: 9-48 VDC - Power Consumption: Typical 1.9W (Max 2.4 W) - Operating Temperature: -40°C to 70°C (-40°F -158°F) - Relative Humidity: 0% to 95% (non-condensing) at 25°C/77°F 3.1 SIM Card/Micro SD Card Installation A. - Page 8 3.4.2 DIN Rail Mounting (Measured in mm) Use 2 pcs of M3 × 6 flat head Phillips screws to fix the mount clip to the router, and then hang the device to the DIN rail. The width of DIN rail is 3.5 cm. Recommended torque for mounting is 1.0 N·m, and the maximum allowed is 1.2 N·m.
- Page 9 4. Log in the Web GUI of Router 4.1 PC Configuration Please connect PC to LAN port of LT-4GPOEW1 router. PC can obtain an IP address, or you can configure a static IP address manually. The following steps are based on Windows 10 operating system for your reference.
-
Page 10: Log In The Router
⑤ Double Click “Internet ⑥ Method 1: click “Obtain an IP Method 2: click “Use the following IP address” to assign address automatically”; Protocol Version 4 (TCP/IPv4)” a static IP manually within the to configure IP address and same subnet of the router. DNS server. - Page 11 C. When you log in with the default username and password, you will be asked to modify the password. It’s suggested that you change the password for the sake of security. Click “Cancel” button if you want to modify it later. D.
-
Page 12: Network Configuration
5. Network Configuration This chapter explains how to connect LT-4GPOEW1 to network via WAN connection or cellular. 5.1 Ethernet WAN Configuration A. Go to “Network > Interface > Port” to change LAN1 to WAN port. B. Go to “Network > Interface > WAN” to configure WAN parameters. Take static IP configuration as an example. - Page 13 E. Go to “Network > Interface > Link Failover” to rise the WAN priority to 1. F. Open your preferred browser on PC, then type any available web address into address bar and see if it is able to visit Internet via LT-4GPOEW1 router. 5.2 Cellular Connection Configuration Take inserting SIM card into SIM1 slot as an example;...
- Page 14 C. Go to “Network > Interface > Link Failover” to enable SIM1 and rise link priority of SIM1. D. Click to configure ICMP ping detection information. E. Click “Status > Cellular” to view the status of the cellular connection. If it shows “Connected”, it means SIM1 has dialed up successfully.
- Page 15 F. Open your preferred browser on PC, then type any available web address into address bar and see if it is able to visit Internet via LT-4GPOEW1 router. [END]...
Need help?
Do you have a question about the Pro Series and is the answer not in the manual?
Questions and answers